I have been making these face masks for family and friends, so thought I would share the pattern here on my blog – it’s totally free – you can make as many as you like, all I ask is that you don’t make money from them – I feel in times like this we should help others and not try to profit.
I made the first prototype and then adjusted the pattern to allow more space at the front for breathing.
Here is the pattern – simply open it as a PDF in Adobe Reader and print – let me know if you need any help – see below for the making guide.
You will need a piece of cotton fabric 20 cm x 60 cm to cut 2 layers
The mask can also be made of terry towelling and in that case you can cut 1 layer of fabric.
Sew a small dart at the top – for the nose. Now sew a dart seam at the base for the chin shaping. Press the seams – you will need to clip in at the chin shaping to allow you to press the seam open.
I pressed my nose darts in different directions, one to the left and one to the right – to avoid too much bulk at the nose.
Now place the 2 layers together with the right sides of the fabric facing outwards and use a straight stitch to hold the 2 layers together
Pin the pleats in position – in the direction shown on the pattern piece and sew with a straight stitch to secure. You can do the previous 2 steps all in one go if you are an experienced sewer!
I used FOE – Fold over elastic to bind my mask – mainly because I have plenty of it and also because it stretches so the ties are better. You can also use plain cotton bias binding – see my post on making your own bias binding https://modelistecreative.com/2018/02/19/make-sew-your-own-bias-binding-tape/
– or see my YouTube video on applying FOE if you need any help with this.
Bind the edges of the mask first – you have already secured the pleats in position with a holding stitch so this should be easier.
Now continue to apply binding to the top and bottom of the mask. I used elastic binding which allowed me to pull a little over the nose and under the chin to make the mask a snugger fit.
leave ends as ties – mine are 20 cm long – you may want them a little longer if you are using cotton bias binding.
As always I am happy to answer any questions, just leave a comment below.
Happy mask making!
Nicola
4 Comments
this is advertised as free pattern and all I see is pictures. Other masks have actually put the actual life size pattern on the website. I do not understand why this is not here.
Dear Jackie, If you read the post carefully at the very start it says…here is your 3D face mask pattern and there is a big DOWNLOAD link to click on and the pattern file is there. I am sure you are not trying to be rude but your comment comes across as rude. Maybe if you said something nice first before complaining about a free gift that someone has taken the time and effort to provide for you then your comments would appear less rude.
Taken the time to read the post properly Jackie. Try to be more thankful. The pattern is fantastic and the link is clearly visible at the start.
Maybe you should read the post properly instead of just looking for free patterns and complaining- then you would understand – how rude!